News Articles

Articles posted here are for the use of our clients to get quick self help answers to questions and simple solutions to problems. News reports are not necessarily the opion of our company but for reference only. We don't provide any guarantee that solutions posted or referenced will work for your situation and that you should use them at your own risk. None of the information posted should be used for illegal practices.
Font size: +
2 minutes reading time (351 words)

Windows 7 unable to access UNC or SMB shares 0x80070035

After setting up a new laptop computer with Windows 7 Pro 64-bit, I found that I was unable to access any of my workgroup servers or access my Windows XP workstations. Each time I would attempt to make a connection either using the UNC name and path or using the IP address I would get an error indicating that the spelling was incorrect or that it could not find the location specified. One of the errors I receive is as follows:

Windows cannot access \\{ComputerName}

Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve the problem click Diagnose.


Error code: 0x80070035
The network path was not found.

Days of research and trying many different solutions posted resulted in many failed attempts. Then I found a brief comment by someone asking if the Microsoft client was installed. How simple was that, I didn't even think to check for a missing service application that is normally installed by default in a scratch installation. But in this case it was a factory install and the person who created the image must have left this out.


  1. Click Start menu and enter on the search or run command NCPA.CPL and press Enter.
  2. Right click on the connection that you use for the local connection, and then click the Properties option.
  3.  Verify that Client for Microsoft Networks is listed.

a. If it is not click the Install button.
b. Select the Client option and click the Add button.
c. Select the Client for Microsoft Networks.
d. Click the OK button until you return to your Network Connections listing.
e. Right click on your network connection again and select Disable.
f. Wait about for the icon to indicate the connection is disabled.
g. Right click on your network connection again and select Enable.

Now try your connection to your remote system again.

We hope that this information is helpful. Please let us know how this has helped you or if you have additional questions. As always Firestone Technical Resources, Inc. is here to help with your computer support issues - "Providing personal service for your impersonal technology."



Need Epson TM-T88ii Receipt Driver for Windows 7
vSphere Client fails to connect to vCenter Server ...

Related Posts



Already Registered? Login Here
No comments made yet. Be the first to submit a comment

Are you in need of computer repair?

Start Here

Locations Serviced:





Fort Lupton














Highland Ranch



Have I been pwned?
Check if you have an account that has been compromised in a data breach.